WS2 超细粉体的固相法合成

WS2 超细粉体的固相法合成;WS2;固相反应;过硫系数;高能球磨;粒度     

XeF和KrF的热催化合成及KrF在含氟高能氧化剂NFBF合成中的应用

本文介绍了一种以氟气和惰性气体为原料合成 Kr F2 和 Xe F2 的热催化合成方法并对合成机理和条件作了简单的讨论 ,利用合成的 Kr F2 作为氟化剂合成了含氟高能氧化剂 NF4BF4,纯度约为 93%,其红外光谱和拉曼光谱基本与文献值吻合。元素分析结果表明产品 NF4BF4中含 B5.8%(mass) ,自由氟原子含量为 9.95%(mass) ,与理论值基本一致 ,此结果也间接证明了 Kr F2 质量的可靠性。粉末状的 Xe F2 经升华 -再结晶纯化后可得纯净晶体产品。     

Kinetics of uranium(VI) extraction by bis(octylsulfinyl)methane

The kinetics and mechanism of uranium(VI) extraction from nitric acid solution by bis(octylsulfinyl)methane (BOSM) are studied with the method of stationary interface cell. The effects of temperature, extractant and nitric acid concentrations are discussed. The results showed that the extraction process is controlled by the following reaction: UO₂(NO₃)₂ + BOSM_(i)⇄_k1 ^k-1UO₂(NO₃)₂BOSM_(i). The variation of enthalpy associated with the extraction is -22.1±2.1 kJ/mol. This revised version was published online in July 2006 with corrections to the Cover Date.     

Water/Oil Biphasic Hydroformylation of Higher Olefins over a TPPTS-Rh/SiO2 Catalyst

A novel TPPTS-Rh/SiO2 catalyst, prepared by directly modifying a heterogeneous highsurface-area Rh/SiO2 catalyst with water-soluble TPPTS ligands, could decrease the resistance of mass transfer in water/oil biphasic media for the hydroformylation of higher olefins. The catalytic performance for hydroformylation on this biphasic TPPTS-Rh/SiO2 catalyst system was higher than those of the traditional biphasic HRhCO(TPPTS)3 systems, owing to the chemical bonds between the highly dispersed Rh metal particles and the TPPTS ligands. The catalyst system is applicable for hydroformylation of higher olefins such as 1-dodecene.     

结构参数X的计算方法及与分子总键能和生成焓的关系

本文借助于电负性I和有效主量子数n_i^*定义了有效价电子数Z_i′。由Z_i′、 n^*_i及成键电子数mi定义的原子结构参数δ_i和分子结构参数X被计算。发现A_mB_n型分子的X相似文献   

Analysis of 17β-Estadiol from Sewage in Coastal Marine by Surface Plasmon Resonance Technique

In this study, surface plasmon resonance （SPR） for monitoring 17β-eatradiol （E2） was developed. The small molecule E2 was immobilized on a CM5 sensor chip for an indirect competitive immunoassay to detect E2. The SPR response bahed on the antigen-antibody reaction was measured by injecting the sample solution into the flow system. The limitation of detection was 0.445 μg/L. The developed SPE-SPR system was applied to analyze the seawater samples. Recovery of E2 was 91.6%-93. 1%. Relative standard deviations（RSD） for the E2 assay were between 10.9%-15.1% （n = 3）. The range of determination of E2 samples from the sewage in the coastal marine environ-ment was between ND（lower than detection limit） and ca. 11.78 ng/L.     

微乳液法制备超细K2Ln2Ti3O10及其光催化活性研究

以钛酸四丁酯、氢氧化钾和镧系金属氧化物为原料。采用微乳液法制备了系列超细K2Ln2Ti3O10（Ln=La．Ce,Pr．Nd，Sm，Eu，Gd）光催化剂。并考察了其光催化活性。通过X射线衍射（XRD）、透射电镜（TEM）和紫外可见吸收光谱（UV—Vis）对其进行了表征。结果表明：用微乳液法制备催化剂可以在较低的温度下（900℃），用较短的烧结时间（3h）合成结晶度高、粒径较小（200Mm）的K2Ln2Ti3O10钙钛矿型层状结构化合物。催化剂在紫外光和可见光条件下均具有光催化降解甲基橙的活性。紫外光条件下可以明显提高光催化降解活性，降解率达到60％。     

催化动力学荧光法测定痕量培氟沙星

研究了培氟沙星对铜(Ⅱ)催化过氧化氢氧化罗丹明B使其荧光猝灭的抑制作用,据此建立了催化动力学荧光分析法测定培氟沙星的新方法。在最佳实验条件下,方法线性范围为0.2~4.29μg/mL,检出限为0.2μg/L。对实际样品分析,平均回收率为97.6%~101.7%,相对标准偏差为1.03%~1.9%。     

聚合物-金属纳米复合材料的制备与应用

综述了聚合物-金属纳米复合材料的制备方法，包括原位形成法、沉积法、离子注入法、辐射化学法、光照化学法、直接分散法、球磨法；介绍了聚合物．金属纳米复合材料的应用领域，最后展望了这种材料的发展前景。     

微型质子交换膜燃料电池

针对近期微能源领域对微型质子交换膜燃料电池的各种应用,特别是在移动电子产品中的应用研究日益受到重视,本文较为详细地介绍了各国、特别是美国、日本和欧洲等国家开展微型燃料电池研发的特点和趋势,并对微型质子交换膜燃料电池研发过程中存在的困难及商业化前景作了简要分析。